If you are into 3D printing, you may have encountered a lot of information about the filament for 3D printer specifications. Interestingly, each type of 3D filament has specifications, making us wonder if they are essential and why they matter for you to understand them now. So, when buying a new 3D print filament for your machine, what do you have to check or consider? Here are some critical points to keep in mind whenever you want to get new filaments for your device.

  • Check the diameter of the filament you intend to buy. For better understanding, diameter is the distance across the filament. Most 3D print filaments come in different sizes, with the standard diameter being 1.75mm. So, always ensure you get the correct filament size according to your 3D print Once you have determined the size of the filament your 3D printer uses, the next step is buying it. If you are unsure where to get them, visit our website and place your order.
  • Besides the diameter size, you also need to check on the diameter tolerance of the filament you intend to buy. If you don't know how to determine the diameter tolerance of 3D printer filament, you don't have to worry since you will find it listed along with other specifications. While this specification might not seem like a big issue, it matters to keep an eye on the diameter tolerance of your filament if you want to achieve the best out of your 3D printing.

Those are the primary and crucial points to keep an eye on whenever you buy a new filament for a 3D printer. But wait, does it even matter? Well, it does because your machine calculates it for you. So, when a size deflection is detected, your device will not print using the filament you are using. Here is how this is made possible; the slicer program in your 3D printer calculates everything based on the information you are commanding it.

For instance, you will need to input the diameter size of the filament you will use. It then uses numbers to determine how much the speed, area, and thickness are to push filament through the extruder nozzle. If the filament you're using is not the same diameter as the slicer is expecting, your print will not look as good as it should. It can lead to tiny holes, missing sections, too much filament in places, and other issues. So, the filament must be as close to the spec as possible.  If you tell your slicer it is 1.75mm, it needs to be as close to that as it can be for your 3D printer to function well.

Looking for the cheapest 3D print filament is normal. But in the long run, it is the best filament that saves you money.  Unfortunately, when selecting filament, it is easy to get caught up in pricing. Opting for cheap filament can cause a lot of problems, from bad prints to clogged equipment which in the long run will cost you time and money in lost objects and repair time or expenses for your machine. So, to avoid falling into this trap, choose the correct diameter size of your filament and ensure the diameter tolerance is close to zero!

Sometimes you can know what to buy, but the specs written are wrong. Always buy from a reputable company and the correct brand to avoid this mistake. Doing this will save you a lot of mess from buying your filament blindly. So, this is the right place if you need filament for a 3D printer for your machine. Visit our website to place your order.